The BeamZ Professional Illusion II Moving Head with 30W spot and 3 LED rings is a striking appearance in BeamZ's moving head range and BeamZ Professional. The Illusion II, like many other moving heads, is a moving head with a high power light source, gobos, colors and of course different effects. What makes him so special are the 3 LED rings around the lens that of course can take several colors and include various pre-programmed shows that can be controlled by DMX. A unique extra effect is the result that, certainly with the use of multiple illusions, can be considered an absolute added value.
The BeamZ Illusion features a bright white LED with a power of no less than 30W for unprecedented high light output. The light goes through a 9 gobo + gobo shot, a 9 color color wheel + white (open) and then through a lens with manual focus. Because of the moving head, the beam of light can turn on each side for a maximum range. In addition, the Illusion also has some effects like a strobe and gobo shake effect. In itself, this already guarantees a beautiful light show with a lot of variety, effect and color.
But what makes the Illusion really different is the 3 LED rings around the lens. These RGB LED rings with a total of 76 SMD LEDs can take up multiple colors and create an added effect. Certainly, when using multiple BeamZ Illusion moving heads, there are many spectacular things to do. The Illusion can also rotate up to 630 ° Pan (Pan adjustable between 540 ° and 630 °) for extra range and less limitation. An additional hunt for possibilities over other moving heads.
The BeamZ Illusion II can be used in several ways, making all settings easy with the 4 keys and the display. Control can be done via 12 or 23 DMX channels for complete control of the moving head. It is also possible to make it sound-controlled, using the built-in microphone with adjustable sensitivity. Do you just want him to give a beautiful light show without sound / music? No problem, in that case you use the auto mode where Illusion II works on some built-in programs. Whatever you want, he's completely customizable so you can always count on a beautiful light show.
The BeamZ Illusion is connected via a Powercon connector. This is a high-quality connection that makes it impossible for unlocking of the plug. Powercon out is loaded for power-through power. For the DMX signal, a 3-pin XLR plug is used, which, like the power supply, allows the DMX signal to be looped through.
The BeamZ Illusion II of the BeamZ Professional series is a distinctive appearance between all other moving heads with its 3 LED rings.
- Bright white 30W LED
- RGB 3-in-1 SMD LED ring
- 9 Gobos + open
- Gobo shake effect
- 9 Colors + open
- Choice of 12 or 23 DMX channels
- DMX and Stand-alone mode
- Master / Slave synchronization
- Sound activated with adjustable sensitivity
- Auto mode program
- Adjustable strobe speed
- Manual focus
- DMX input / output via 3-pin XLR
- Rubber finish
- Radiation angle: 4 °
- Pan rotation: 540 ° or 630 °
- Tilt rotation: 200 °
- Power LED: 30 Watt
- Stroboscope speed: 1 - 25 fps
- Connection voltage: 230Vac / 50Hz
- Power consumption: 80W
Dimensions and weight
- Dimensions: 265 x 170 x 370mm
- Weight: 5.5kg